No Additional PayPal Fees
Prices Lower than our Regular Pricelist Prices
Fast Support Reply

Neuro Research

View as Grid List
Sort by
Display per page

Cedrus Lumina 3G System for fMRI

Lumina’s sturdy and fast system captures subjects’ button presses and triggers generated by MR scanners, time-stamps with a millisecond accuracy, and converts them into simultaneous serial port and parallel outputs. The system is supported by many software packages (such as E-Prime, Inquisit, MEDx, and SuperLab) and programming languages (C++, Python, Matlab). The time-stamped information is output only on the serial port. Included with this system is 1 year warranty on all parts and labor. The system is complete and ready to install. It includes a fiber optic response pad of your choice (select from one of the models shown), about 130 ft. of shielded cables, and Lumina 3G controller.
$ 3,509.87

Dynamic Snore Microphone

Dynamic Snore Microphones offer a wide frequency range, and sensitivity to other respiratory sounds besides snoring. The sensor converts snoring, and other sounds in the audio range picked up through the skin, to a small analog voltage that provides a clear, reliable indication of the presence of these sounds. The sensor may be connected to any AC (low level) channel on the recorder.
$ 206.15

ER1 Tubal Insert Ear Phones

ER1 by Etymotic Research was designed to imitate the normal resonance of the open ear, and is used for speech audiometry where the goal is to reproduce the same frequency response at the eardrum for speech as would be produced in the live situation.
$ 950.95

ER2 Tubal Insert Ear Phones

For research with humans and animals when a 16 kHz bandwidth is required.
$ 1,444.38

ER3C Tubal Insert Earphones

ER3C™ earphones are the next generation of insert earphones, replacing ER3A earphones, which have been the worldwide standard for audiometric insert earphones since 1985. 10 Ohm or 50 Ohm model available.
From $ 702.24

Microphone (for ActiveTwo)

Microphone to record audio stimuli and responses. Connects directly to the standard BioSemi ActiveTwo Ergo input on the AD-box. Equipped with a 1m connection cable and 5-pol DIN connector.
$ 392.35

Subject Response Box, single/dual

Subject Response Box, single or dual switch, suitable only for ActiveTwo EEG System, including DIN type connector for direct connect to AUX2 or AUX3 (ERGO inputs required). Please note: the Subject Response Box will send triggers directly and without delay to the EEG via pins 9/10/11/12 (configuration file has to be modified accordingly).
From $ 465.50

Cedrus Lumina LP-3B

Lumina is a quality-built patient response system (also called button response unit, or BRU) designed for use in an MRI environment. It meets the requirements of both the clinical and research communities. The Lumina LP-3B series is a single response pad, which provides three keys and can be easily used in either hand (Response Pad only, Lumina Controller not part of this package). For maximum patient safety, the response pads are built with 100% plastic and fiber optics, eliminating all risk to patients and all interference with or from the magnet. It can be used in a variety of MRI scanners and with a variety of different simulation programs.
$ 1,592.01

Cedrus Lumina LP-DIAM

Lumina is a quality-built patient response system (also called button response unit, or BRU) designed for use in an MRI environment. It meets the requirements of both the clinical and research communities. The Lumina LP-DIAM series is a single response pad, which provides four keys designed for experiments that involve spatial orientation (Response Pad only, Lumina Controller not part of this package). For maximum patient safety, the response pads are built with 100% plastic and fiber optics, eliminating all risk to patients and all interference with or from the magnet. It can be used in a variety of MRI scanners and with a variety of different simulation programs.
$ 1,592.01

Cedrus Lumina LP-LH/RH

Lumina is a quality-built patient response system (also called button response unit, or BRU) designed for use in an MRI environment. It meets the requirements of both the clinical and research communities. The Lumina LP-LH/RH series is a single, ergonomic large response pad, which provides four keys for either Right Hand (RH) or Left Hand (LH) (Response Pad only, Lumina Controller not part of this package). For maximum patient safety, the response pads are built with 100% plastic and fiber optics, eliminating all risk to patients and all interference with or from the magnet. It can be used in a variety of MRI scanners and with a variety of different simulation programs.
$ 1,592.01

Cedrus Lumina LP-LINE

Lumina is a quality-built patient response system (also called button response unit, or BRU) designed for use in an MRI environment. It meets the requirements of both the clinical and research communities. The Lumina LP-LINE series is a single response pad, which provides four keys in a row (Response Pad only, Lumina Controller not part of this package). For maximum patient safety, the response pads are built with 100% plastic and fiber optics, eliminating all risk to patients and all interference with or from the magnet. It can be used in a variety of MRI scanners and with a variety of different simulation programs.
$ 1,592.01

Cedrus Lumina LP-PAIR

Lumina is a quality-built patient response system (also called button response unit, or BRU) designed for use in an MRI environment. It meets the requirements of both the clinical and research communities. The Lumina LP-PAIR series are two seperate response pads each providing two keys. For maximum patient safety, the response pads are built with 100% plastic and fiber optics, eliminating all risk to patients and all interference with or from the magnet. It can be used in a variety of MRI scanners and with a variety of different simulation programs.
$ 1,592.01