Skip to the beginning of the images gallery

Micro Neonatal Disposable RT Electrodes (EL510, 60/box)

$468.00

SKU

NS8186

Micro NeoLead® are disposable, radio-translucent, pre-gelled and adhesive electrodes for neonatal applications. They are pre-wired with a 61cm lead which terminates in a DIN 1.5mm touch-proof (TP) connector. 3 electrodes per pack, 20 packs per box (60 electrodes in total).

Details

These Micro NeoLead® electrodes are disposable, radio-translucent, pre-gelled and adhesive electrodes. They are commonly used on pediatric (neonates, infants and children) subjects for applications including ECG and fEMG (Facial EMG). They are commonly referred to as EL510 from BIOPAC Systems Inc. The adhesive material has been designed for a strong hold while ensuring easy removal and hence is most suitable where the skin is soft and tender.

The size of these micro neonatal electrodes is 25mm x 10mm and their contact area is 10mm x 10mm.

These radio translucent electrodes come pre-wired with a 61cm long lead wire. Lead wires are colour-coded (green, black and white) for easy identification. They terminate in DIN 1.5mm touch-proof (TP) socket connectors (female). The electrode contact is made of Ag/AgCl and is pre-gelled with hydrogel, ensuring low impedances and high signal-quality recordings. The entire electrode including the lead is radio translucent, making them nearly invisible on X-rays.

60 Micro Neonatal Disposable RT Electrodes (EL510) per box. Electrodes are packed in sets of three Micro Neonatal Disposable RT Electrodes per pack.

Technical Specifications

Size: 25mm x 10mm
Contact area size: 10mm x 10mm
Cable Length: 61cm
Lead Wire Material: Carbon with Polypropylene jacket
Connector: DIN 1.5mm touch-proof (TP) socket connector (female)
Radio Translucent: Yes
Pre-gelled: Yes, with hydrogel
Not made with natural rubber latex or plasticizer DEHP
Packaging: 60 x Micro Neonatal Disposable RT Electrodes (EL510) per box (20 x 3/pack)

Direction for Use

Prep the skin with a dry pad (e.g. ELPAD). The skin needs to be as clean and dry as possible.
Pre-warm the hydrocolloid adhesive by holding the electrodes between the palms of your hands for at least 60 seconds, before removing the plastic liner.
Peel the plastic liner from the electrode.
Place the electrode on the skin at the desired location and hold it for 60 seconds to ensure proper adhesion.
Discard the plastic liner.
After application, remove the electrode from the subject's skin and dispose of it.