Skip to the beginning of the images gallery

Ag/AgCl Sintered Electrodes (Extra Flat)

As low as $24.50

Only %1 left

SKU

NS-7632

Extra Flat Ag/AgCl Electrode, 100cm lead wire available in different diameters, with a 1.5mm touch-proof (TP) connector. Can be used for a variety of applications such as EEG, EMG, facial EMG and EOG.

Details

These Ag/AgCl Sintered Electrode come with a 1mm thick Ag/AgCl electrode sensor with is pre-assembled to a connection lead wire. This housing is of a "Extra Flat Profile" meaning there is now epoxy ring housing around the actual Ag/AgCl sintered electrode. Ag/AgCl sintered electrodes with extra flat profile come in different diameters. Packaging size is one Ag/AgCl sintered electrode per pack.

This Ag/AgCl sintered electrode features no cavity and hence we recommend either using no or only very little conductive gel, cream, or paste or a highly adhesive gel.

This Ag/AgCl sintered electrode can be re-used when treated with care and cold sterilized after use. The lead wire length is 100cm (40”) and terminates in a DIN 1.5mm touch-proof (TP) connector. Standard lead wires are PVC insulated multi-strand copper with internal Tinsel for additional strength and durability.

These versatile Ag/AgCl sintered electrodes have the consistency of soft metal and can be re-shaped by sanding, cutting, drilling and filing. Designed for use in electrochemistry, stimulation, precision bioelectric recording, electrophysiology and neurophysiological applications.

Ag/AgCl sintered electrodes can be used as both standard and reference electrodes, due to their stability and reproducible results. Silver-Silver Chloride (Ag/AgCl) Electrodes are known for their low offset voltage, low noise and stability. Reusable and non-toxic, the electrodes can be cold sterilized and used for many years with minimal care.

Technical Specifications

Connector: DIN 1.5mm touch-proof (TP) socket (female connector)
Lead wire: Tinsel with PVC insulation
Sensor material: Sintered Ag/AgCl
Cable length: 100cm
Sensor diameter: 4mm, 6mm, 8mm, 12mm or 14mm
Height (incl. epoxy housing): 2.5-3mm (irregular due to epoxy)
Packaging: 1 Ag/AgCl Sintered Electrode (Extra Flat) per pack

Technical Features

Low offset voltage
No re-chloridizing necessary
Reusable and resurfacable
Cold sterilization possible
No Epoxy Housing
Pre-assembled with a tinsel wire, terminating in a DIN 1.5mm touch-proof (TP) connector
Profile: Extra Flat (2mm height)

Electrical Specifications

The following values were measured between pairs of electrodes and in 0.9% saline solution. These are median values from a large sample:

DC offset Voltage (bias potential):	180 µV, Drift: 25 µV / h (at constant temperature)
Noise:	1 µV P – P (0.1 – 1 (0.1 – 1 kHz)
Polarization (counter EMF):	2 – 4µV at 0.1 µA