Ag/AgCl Sintered Electrodes (Standard Profile)

These Ag/AgCl Sintered Electrode come with a 1mm thick Ag/AgCl electrode sensor mounted in a durable epoxy ring housing. This housing is of a "Standard Profile" meaning the height of the housing is 6mm. The epoxy coating of the housing ensures durability and a waterproof electrode. Ag/AgCl sintered electrodes with standard profile come in two different sizes: 4mm diameter and 8mm diameter. Packaging size is one Ag/AgCl sintered electrode per pack.

Ag/AgCl sintered electrodes feature a small cavity that should be filled with a conductive gel, cream, or paste. The depth of the cavity is 2mm.

This Standard Profile Ag/AgCl electrode can be re-used when treated with care and cold sterilized after use. The lead wire length is 100cm (40”) and terminates in a DIN 1.5mm touch-proof (TP) connector. Standard lead wires are PVC insulated multi-strand copper with internal Tinsel for additional strength and durability.

These versatile Ag/AgCl sintered electrodes have the consistency of soft metal and can be re-shaped by sanding, cutting, drilling and filing. Designed for use in electrochemistry, stimulation, precision bioelectric recording, electrophysiology and neurophysiological applications.

Ag/AgCl sintered electrodes can be used as both standard and reference electrodes, due to their stability and reproducible results. Silver-Silver Chloride (Ag/AgCl) Electrodes are known for their low offset voltage, low noise and stability. Reusable and non-toxic, the electrodes can be cold sterilized and used for many years with minimal care.

Technical Specifications

• Connector: DIN 1.5mm touch-proof (TP) socket (female connector)
• Lead wire: Tinsel with PVC insulation
• Sensor material: Sintered Ag/AgCl
• Cable length: 100cm
• Sensor diameter: 4mm or 8mm
• Height (housing): 6mm
• Cavity depth: 2mm
• Packaging: 1 Ag/AgCl Sintered Electrode (Standard Profile) per pack

Technical Features

• Low offset voltage
• No re-chloridizing necessary
• Reusable and resurfacable
• Cold sterilization possible
• Endurable Epoxy Housing
• Pre-assembled with a tinsel wire, terminating in a DIN 1.5mm touch-proof (TP) connector
• Profile: Standard (5mm height)

Electrical Specifications

The following values were measured between pairs of electrodes and in 0.9% saline solution. These are median values from a large sample: