Ag/AgCl Sintered Electrodes (Shielded)

Ag/AgCl Shielded Sintered Electrode come with a 1mm thick Ag/AgCl electrode sensor mounted in a durable epoxy ring housing. This epoxy coating ensures durability and a waterproof electrode. This Ag/Agcl shielded sintered electrode can be re-used when treated with care and cold sterilized after use. The lead wire length is 100cm (40”) and terminates in a 1.5mm touch-proof (TP) connector. Standard lead wires are PVC insulated multi-strand copper with internal Tinsel for additional strength and durability. Ag/AgCl shielded sintered electrodes can be used for a variety of applications such as EEG, EMG, facial EMG, EOG, etc.

These electrodes are similar to EL254S/EL258S.

These Ag/AgCl Shielded Sintered Electrode come with a 1mm thick Ag/AgCl electrode sensor mounted in a durable epoxy ring housing. The height of the housing is 5mm. The epoxy coating of the housing ensures durability and a waterproof electrode. Ag/AgCl shielded sintered electrodes come in two different sizes: 4mm diameter and 8mm diameter. Packaging size is one Ag/AgCl sintered electrode per pack.

Ag/AgCl sintered electrodes feature a small cavity that should be filled with a conductive gel, cream, or paste. The depth of the cavity is 2mm.

This Ag/AgCl sintered electrode can be re-used when treated with care and cold sterilized after use. The lead wire length is 100cm (40”) and terminates in a DIN 1.5mm touch-proof (TP) connector. Standard lead wires are PVC insulated multi-strand copper with internal Tinsel for additional strength and durability.

Ag/AgCl sintered electrodes can be used as both standard and reference electrodes, due to their stability and reproducible results. Silver-Silver Chloride (Ag/AgCl) Electrodes are known for their low offset voltage, low noise and stability. Reusable and non-toxic, the electrodes can be cold sterilized and used for many years with minimal care.

Technical Specifications

• Connector: 2 x DIN 1.5mm touch-proof (TP) socket (female connector)
• Lead wire: Tinsel with PVC insulation and Shield
• Sensor material: Sintered Ag/AgCl
• Cable length: 100cm
• Sensor diameter: 4mm or 8mm
• Height (housing): 6mm
• Cavity depth: 2mm
• Packaging: 1 Ag/AgCl Sintered Electrode (Shielded) per pack

Technical Features

• Low offset voltage
• No re-chloridizing necessary
• Reusable and resurfacable
• Cold sterilization possible
• Endurable Epoxy Housing
• Shielded electrode minimizing electrical interference
• Pre-assembled with a tinsel wire, terminating in a DIN 1.5mm touch-proof (TP) connector
• Profile: Standard (5mm height)

Electrical Specifications

The following values were measured between pairs of electrodes and in 0.9% saline solution. These are median values from a large sample: